使用如下終端命令可以在 Linux 主機中安裝 ssh服務器sudo apt-get install openssh-server

lin@lin-machine:~$ sudo apt-get install openssh-serverReading package lists... DoneBuilding dependency tree Reading state information... DoneThe following extra packages will be installed: libck-connector0 ncurses-term openssh-client openssh-sftp-server ssh-import-idSuggested packages: libpam-ssh keychain monkeysphere rssh molly-guardThe following NEW packages will be installed: libck-connector0 ncurses-term openssh-server openssh-sftp-server ssh-import-idThe following packages will be upgraded: openssh-client1 upgraded, 5 newly installed, 0 to remove and 438 not upgraded.Need to get 1,180 kB of archives.After this operation, 3,429 kB of additional disk space will be used.Do you want to continue? [Y/n] YGet:1 http://cn.archive.ubuntu.com/ubuntu/ trusty/main libck-connector0 amd64 0.4.5-3.1ubuntu2 [10.5 kB]Get:2 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-client amd64 1:6.6p1-2ubuntu2.11 [564 kB]Get:3 http://cn.archive.ubuntu.com/ubuntu/ trusty/main ncurses-term all 5.9+20140118-1ubuntu1 [243 kB]Get:4 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-sftp-server amd64 1:6.6p1-2ubuntu2.11 [34.1 kB]Get:5 http://cn.archive.ubuntu.com/ubuntu/ trusty-updates/main openssh-server amd64 1:6.6p1-2ubuntu2.11 [318 kB]Get:6 http://cn.archive.ubuntu.com/ubuntu/ trusty/main ssh-import-id all 3.21-0ubuntu1 [9,624 B]Fetched 1,180 kB in 22s (51.6 kB/s) Preconfiguring packages ...Selecting previously unselected package libck-connector0:amd64.(Reading database ... 168838 files and directories currently installed.)Preparing to unpack .../libck-connector0_0.4.5-3.1ubuntu2_amd64.deb ...Unpacking libck-connector0:amd64 (0.4.5-3.1ubuntu2) ...Preparing to unpack .../openssh-client_1%3a6.6p1-2ubuntu2.11_amd64.deb ...Unpacking openssh-client (1:6.6p1-2ubuntu2.11) over (1:6.6p1-2ubuntu2.7) ...Selecting previously unselected package ncurses-term.Preparing to unpack .../ncurses-term_5.9+20140118-1ubuntu1_all.deb ...Unpacking ncurses-term (5.9+20140118-1ubuntu1) ...Selecting previously unselected package openssh-sftp-server.Preparing to unpack .../openssh-sftp-server_1%3a6.6p1-2ubuntu2.11_amd64.deb ...Unpacking openssh-sftp-server (1:6.6p1-2ubuntu2.11) ...Selecting previously unselected package openssh-server.Preparing to unpack .../openssh-server_1%3a6.6p1-2ubuntu2.11_amd64.deb ...Unpacking openssh-server (1:6.6p1-2ubuntu2.11) ...Selecting previously unselected package ssh-import-id.Preparing to unpack .../ssh-import-id_3.21-0ubuntu1_all.deb ...Unpacking ssh-import-id (3.21-0ubuntu1) ...Processing triggers for man-db (2.6.7.1-1ubuntu1) ...Processing triggers for ureadahead (0.100.0-16) ...ureadahead will be reprofiled on next rebootProcessing triggers for ufw (0.34~rc-0ubuntu2) ...Setting up libck-connector0:amd64 (0.4.5-3.1ubuntu2) ...Setting up openssh-client (1:6.6p1-2ubuntu2.11) ...Setting up ncurses-term (5.9+20140118-1ubuntu1) ...Setting up openssh-sftp-server (1:6.6p1-2ubuntu2.11) ...Setting up openssh-server (1:6.6p1-2ubuntu2.11) ...Creating SSH2 RSA key; this may take some time ...Creating SSH2 DSA key; this may take some time ...Creating SSH2 ECDSA key; this may take some time ...Creating SSH2 ED25519 key; this may take some time ...ssh start/running, process 17527Setting up ssh-import-id (3.21-0ubuntu1) ...Processing triggers for libc-bin (2.19-0ubuntu6.9) ...Processing triggers for ureadahead (0.100.0-16) ...Processing triggers for ufw (0.34~rc-0ubuntu2) ...

查看當前的虛擬機的ip地址

lin@lin-machine:~$ ifconfigeth0 Link encap:Ethernet HWaddr 00:0c:29:f1:a1:37 inet addr:192.168.147.136 Bcast:192.168.147.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fef1:a137/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3950 errors:0 dropped:0 overruns:0 frame:0 TX packets:514 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1453734 (1.4 MB) TX bytes:63371 (63.3 KB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:180 errors:0 dropped:0 overruns:0 frame:0 TX packets:180 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:13377 (13.3 KB) TX bytes:13377 (13.3 KB)

在PC上查看ip地址

Microsoft Windows [版本 6.1.7601]版權所有 (c) 2009 Microsoft Corporation。保留所有權利。E:Userslibra>ipconfigWindows IP 配置...以太網適配器 VMware Network Adapter VMnet8: 連接特定的 DNS 后綴 . . . . . . . : 本地鏈接 IPv6 地址. . . . . . . . : fe80::9074:b9f5:ddaf:9082%25 IPv4 地址 . . . . . . . . . . . . : 192.168.147.1 子網掩碼 . . . . . . . . . . . . : 255.255.255.0 默認網關. . . . . . . . . . . . . :...E:Userslibra>

【備注】pc和linux虛擬機在同個網段的

測試他們是否可以ping

lin@lin-machine:~$ ping 192.168.147.1PING 192.168.147.1 (192.168.147.1) 56(84) bytes of data.64 bytes from 192.168.147.1: icmp_seq=1 ttl=64 time=0.586 ms64 bytes from 192.168.147.1: icmp_seq=2 ttl=64 time=0.442 ms64 bytes from 192.168.147.1: icmp_seq=3 ttl=64 time=0.435 ms^C--- 192.168.147.1 ping statistics ---3 packets transmitted, 3 received, 0% packet loss, time 1999msrtt min/avg/max/mdev = 0.435/0.487/0.586/0.074 ms

【可能存在一些異常的原因】注意： Windows 7 默認打開了系統防火墻，是禁ping的，如果在Linux下ping Windows 7，需要先關閉Windows 7 的防火墻。

沒有問題后我們在SecureCRT上開始測試

【備注】根據自己的情況來寫IP和主機名

來測試一下

以上就是本文的全部內容，希望對大家的學習有所幫助，也希望大家多多支持好吧啦網。