Oracle’s DBMS_Profiler:PL/SQL 性能調整DBMS_PROFILER 包舉例 ;;;;下面是我提供的怎樣使用配置的簡單例子,運行配置文件來測試下面例程的性能. 例程用到的自定義腳本緊隨其后.1. 創建過程. create or replace procedure am_perf_chk (pi_seq;;in;number, ;pio_status in out nocopy varchar2) is ;;l_dat date := sysdate; begin ;;if trunc(l_dat) = '21-sep-02' and pi_seq = 1 then ;;;;pio_status := 'OK' ;;else ;;;;pio_status := 'Invalid tape loaded' ;;end if; exception ;;when others then ;;;;pio_status := 'Error in am_perf_chek' end; 2. 用配置文件調用例程 替換上面的例程, 執行call_profiler.sql腳本(腳本代碼參見下面),傳入pi_seq=2 SQL> @d:amcall_profiler.sql Profiler started Invalid tape loaded PL/SQL procedure sUCcessfully completed. Profiler stopped Profiler flushed runid:8 3. 評估執行時間:執行eavluate_profiler_results.sql腳本,得到時間統計SQL> @d:amevaluate_profiler_results.sql Enter value for runid: 8 Enter value for name: am_perf_chk Enter value for owner: scott Line;;;Occur;;;;Msec Text---------- ---------- ---------- ------------------------------------------------------------------- 1;;;;procedure am_perf_chk (pi_seq;;in;number, 2;;;pio_status in out nocopy varchar2) is 3; 243.05965l_dat date := sysdate; 4;;;;begin 5; 186.35732if trunc(l_dat) = '21-sep-02' and pi_seq = 1 then 6; 0; 0;;pio_status := 'OK'; 7 else 8;;;;;;;18.416151;;pio_status := 'Invalid tape loaded'; 9 end if; 10;;;;exception 11 when others then 12; 0; 0;;pio_status := 'Error in am_perf_chek';! 13; 12.410361 end;13 rows selected.Code% coverage-------------- 66.66666674. 正如你看到的,第三行執行時間提高到86毫秒.但是改變if語句,重新執行上面的過程,將會得到新的結果: ;;;;;;Line;;;Occur;;;;Msec Text---------- ---------- ---------- ------------------------------------------------------------------- 1;;;;procedure am_perf_chk (pi_seq;;in;number, 2;;;pio_status in out nocopy varchar2) is 3; 2; 17.978816l_dat date := sysdate; 4;;;;begin 5; 18.419503if pi_seq = 1 and trunc(l_dat) = '21-sep-02' then 6; 0; 0;;pio_status := 'OK'; 7 else 8; 17.512684;;pio_status := 'Invalid tape loaded'; 9 end if; 10;;;;exception 11 when others then 12; 0; 0;;pio_status := 'Error in !am_perf_chek'; 13; 1;.731657 end;13 rows selected.Code% coverage-------------- 66.66666675. 正如你看到的, 這種情境下第三行執行時間從86毫秒減少到8毫秒,多余的時間是由于內置trunc()函數引起., 這種情境下假如第一個條件為false,則不會執行trunc()函數.這僅僅是個簡單的例子,當你測試的例程越大,你面臨的挑戰更大.這個配置結果也證實了執行期間代碼被覆蓋多少行,從而讓我們知道處于性能監視中的代碼范圍。 假如任何PL/SQL塊性能出現問題，它也能提煉出各種不同情景的正在在執行的代碼并檢查配置結果，從而查明問題所在。6. 對于一個特定的情景，假如執行一段非凡的代碼段，可以得到合理的分析，即使代碼根本一點都不能運行。環境的創建 默認安裝或數據庫的創建狀態下，DBMS_PROFILER包不會自動安裝，請DBA用profload.sql腳本創建它.用一個權限較大的或一個單獨的用戶，創建存儲統計信息的表。假如用如SYS用戶創建，則給其它用戶授予DML權限，并且對這些表創建一個共同的簡寫名. 創建表的如下: PLSQL_PROFILER_RUNS表:PL/SQL配置的運行細節. PLSQL_PROFILER_UNITS表:運行中每一個庫單元的信息. PLSQL_PROFILER_DATA表:所有配置文件運行時的數據累積. PLSQL_PROFILER_RUNNUMBER序列提供了RUNID運行和解釋配置數據 ORACLE提供了三個表來統計，填充RUNID。有許多第三方的工具可以提供自定義的基于這些數據的報告，ORACLE提供profrep.sql腳本評估數據（在<oracle_home>plsqldemo目錄下）,下面的兩個簡單腳本就是上面用到的，用來檢查程序單元的執行時間.執行時間以毫秒存儲 -----------------------------------------------------------Script: call_profiler.sql-----------------------------------------------------------set head offset pages 0select decode(dbms_profiler.start_profiler, '0', 'Profiler started', 'Profiler error')fromdual;--< place your routine in the below block >-- declare l_status varchar2(200);begin am_perf_chk(2, l_status); dbms_output.put_line(l_status);end;/select decode(dbms_profiler.stop_profiler, '0', 'Profiler stopped', 'Profiler error')fromdual;select decode(dbms_profiler.flush_data, '0', 'Profiler flushed', 'Profiler error')fromdual;select 'runid:' plsql_profiler_runnumber.currval fromdual;set head onset pages 200-----------------------------------------------------------Script: evaluate_profiler_results.sql-----------------------------------------------------------undef runidundef ownerundef nameset verify offselect s.line 'Line', p.total_occur 'Occur', p.total_time 'Msec', s.text 'Text'fromall_source s, (select u.unit_owner, u.unit_name, u.unit_type, d.line#, d.total_occur, d.total_time/1000000 total_time fromplsql_profiler_data d, plsql_profiler_units u where; u.runid = &&runid and;u.runid = d.runid and;u.unit_number = d.unit_number) pwhere; s.owner = p.unit_owner (+)and;s.name = p.unit_name (+)and;s.type = p.unit_type (+)and;s.line = p.line# (+)and;s.name = upper('&&name')and;s.owner = upper('&&owner')order by s.line;select exec.cnt/total.cnt * 100 'Code% coverage'from; (select count(1) cnt from plsql_profiler_data d, plsql_profiler_units u where d.runid = &&runid and u.runid = d.runid and u.unit_number = d.unit_number ;;;;;and u.unit_name = upper('&&name') and u.unit_owner = upper('&&owner')) total, (select count(1) cnt from plsql_profiler_data d, plsql_profiler_units u where d.runid = &&runid and u.runid = d.runid and u.unit_number = d.unit_number and u.unit_name = upper('&&name') and u.unit_owner = upper('&&owner') and d.total_occur > 0) exec;undef runidundef ownerundef name結論 DBMS_PROFILER是非常強大的工具，其一就是可以識別PL/SQL的性能問題.這個工具最好用在開發時期,用來調整基于各種應用的情景的代碼，它也能用很好的調整已在使用中的例程并且采取顯而易見的時間去執行。 總之，這個工具可以給每一行代碼給予性能統計，它可以幫助我們?cè)u(píng)估和調整到一個出色的水平,當檢查SQL語句的性能問題時，PL/SQL代碼不應該忽略，相反應該調整到最佳的結果.